Hot water heater hook up kit
Good morning, You can do either installation process. Make gas connections with solid steel pipe Photo 8 or soft copper with flare fittings Fig.
Replacing a water heater isn't difficult if you're handy with basic tools and have a bit of experience soldering copper. Galvanized steel pipes are difficult to replace.
When connecting the water lines, solder the copper fittings before you screw them to the tank so you don't heat the tank itself while soldering Photo 5. Even if you don't need a new water heater right now, chances are you will within the next few years. Use two pipe wrenches to avoid stressing the valve.
Discharge pipe Fittings Pipe thread compound Pressure relief valve Solder Venting pipe and connectors Water and gas piping. We recommend that you remove the pipes back to the nearest tee, screw on a plastic-lined galvanized nipple and complete the connections with copper as shown in our photo series.
When your water heater begins to leak, you have to replace it fast. Because of hot water heater hook up kit heat buildup, keep plastic pipe at least 6 in.
Out with the old, in with the new
Vent diameters are sized according to the heat output of the water heater. Shut off the main water supply as well and drain the lines by opening a faucet on the lowest floor.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Many homes have galvanized steel or plastic CPVC water supply pipes. You'll need a strong helper or a dolly when you move the old one out and wheel the new one in.
Step 1: Shut off the gas and water
If you locate your water heater where leakage could cause damage to the floor what to do if you hook up with your friend other parts of the house, set a pan of an approved size under it metal for gas water heaters. First turn off the power to the water heater at your main electrical panel.
I can't imagine doing any kind of plumbing For the valve to work properly, the discharge pipe must be kept free of obstructions Fig. Follow the manufacturer's instructions for wiring the new water heater. Drain the water in the tank. Attach a copper discharge pipe see Fig.